Join us in June for our ‘Safety In Mining’ Webinar Series

As an industry leader offering integrated electrical protection, integrated power distribution systems, monitoring and control solutions and communication systems for coal and hard rock mining, we’ve launched the Ampcontrol Group ‘Safety in Mining’ webinar series. Running throughout June, we are offering a range of free, technical presentations designed for industry.

Kicking off on June 9, we’ll be welcoming ResTech Principal Engineer, Dr Peter Stepien, who will share insights from his ACARP research project around the ‘Control of Touch Potential Transients During Switching’. During a number of investigations into electric shock incidences in the past, machine frames measured touch potential transients when switchgear closed or opened. There were no faults present in the equipment or the earth fault limited supply, yet touch potentials occurred. This webinar will step participants through Peter’s current research that aims to understand the method by which these touch potentials occur and determine a method to eliminate them to improve mine safety.

On June 16, Philip Reilly, Ampcontrol’s Oil Service Manager, will deliver his webinar titled ‘Oil Analysis: Testing OLTC & Managing Corrosive Sulphur in Transformers’. Managing a large fleet of ageing transformers is a technical challenge faced by many Australian mines and reliability surveys show that the On Load Tap Changer (OLTC) can account for up to 30% of all transformer failures. This webinar will address failure modes & available condition monitoring techniques and will also outline the role of oil analysis.  The webinar will also provide insights into the mechanism of copper sulphide formation in transformers, failure modes, details of service experiences, and what assessment and mitigation techniques are available. 

Finally, Ampcontrol Group Engineering Manager, Dr Ian Webster, will deliver his webinar titled ‘Arc Faults (and Flashes) and the Hierarchy of Controls’ on June 23. This webinar will look at the application of the hierarchy of controls to the hazards associated with arcing faults in high powered electrical equipment in general, and in confined spaces such as mines and tunnels. 

We’re committed to connecting industry contacts across Australia with practical insights into real world issues being faced onsite. Attendance is free, secure your space today at one or all of the webinars in the series.

Hire Stock and Fast Action Ensures Minimal Downtime

During routine high voltage maintenance at a surface mine in western NSW, conducted by Ampcontrol’s High Voltage Service team, a transformer failed testing and required inspection and overhaul. To ensure the mine experienced minimal downtime, the on-site team placed a call to our Tomago base to see if a suitable hire replacement was available.

The hire team received the call at 3:30pm and a suitable hire transformer arrived at the mine site at 8am the following day. Prior to leaving for site the following was undertaken:

  • An oil sample was taken from the transformer and delivered to Ampcontrol member company Verico to conduct fast turnaround oil testing
  • A sketch of the transformer was sent to the customer and a number of small alterations were undertaken
  • Delivery trucks and cranes were ordered

The replacement hire transformer was loaded to the truck at 6:30pm that same day for transport and an overnight stay in Mudgee. The following day a new gland plate was made in Ampcontrol’s fabrication workshop and driven to site by an Ampcontrol High Voltage Service team member.

Onsite, the existing failed transformer was uninstalled and loaded on the truck; while the hire transformer was installed, tested and commissioned. The failed transformer was delivered to Ampcontrol’s transformer workshop in Tomago NSW for inspection and overhaul.

Operating within an extended 16 hour shift so as to minimise customer downtime, the on-site HV service team conducted significant planning to ensure site alterations were kept to a minimum. Undertaking this planning ensured the failed transformer could be easily re-installed following the conclusion of repair works.

Read the full case study here.

2020 Transformer Maintenance Webinar Series

As a leading provider of transformer lifecycle support services, we’ve launched the Ampcontrol Transformer Maintenance Series and our next webinar is scheduled on 16 June. Managing a large fleet of ageing transformers is a technical challenge faced by many Asset Managers onsite. Reliability surveys show that the On Load Tap Changer (OLTC) can account for up to 30% of all transformer failures. To manage the overall reliability of a transformer, a condition monitoring program should also include condition assessment of the OLTC

Delivered by our Oil Services Manager Philip Reilly and titled ‘Oil Analysis: Testing OLTC & Managing Corrosive Sulphur in Transformers‘ this webinar will address failure modes and available condition monitoring techniques and will also outline the role of oil analysis.

Backed by his extensive technical experience in transformer oil testing, oil analysis’ condition assessment and oil filtration, Philip will provide insights into the mechanism of copper sulphide formation in transformers, failure modes, details of service experiences, and what assessment and mitigation techniques are available.

We’re committed to connecting industry contacts across Australia with practical insights into the best way to manage their critical HV assets – register to attend this free event today.

If you missed the first two webinars in our series covering the Ageing, Assessment and Management of HV Oil Filled Transformers and Power Transformers: Oil Diagnostics, Failures and Life Extension, you can view them at any time on our YouTube Channel.

Transformer Retrofill Roadshow Heads to Gladstone, Newcastle and Melbourne

As a leading Australian provider of transformer lifecycle support services, Ampcontrol are committed to connecting industry contacts across Australia with practical insights into the best way to manage their critical HV assets.

With transformer manufacturing and service history spanning over 50 years, our complete lifecycle support includes transformer overhauls, upgrades, rewinds; oil regeneration, filtration and disposal; high voltage and oil testing; diagnosis and ongoing maintenance.

In collaboration with MIDEL, Ampcontrol will be presenting a range of technical seminars aimed at providing real world case studies on replacing mineral oil in transformers with ester fluids. Held on November 26, 27 and 28 in Gladstone, Newcastle and Melbourne these free events are a must attend.

Ampcontrol’s Oil Services Manager Phil Reilly will provide an overview about natural ester fluids including some of the technical challenges and asset life considerations related to transformer retrofilling.

Places to these events are limited, to secure your free ticket head to the registration page.