Real Time Gas Monitoring System – Gasguard 2

From complete mine wide monitoring and control via fibre or copper to machine gas monitoring systems, Gasguard 2 suits a wide range of applications.

Gasguard 2 comprises of an Intrinsically Safe (Ex ia I Ma) display module which allows for the display and transmission of detector data and system information. Housed within an IP66 rated stainless steel enclosure the display module is available in three variants: a glanded display supporting both digital and analogue, or pluggable versions supporting either digital or analogue.

Technical Data Sheet – Gasguard 2 Monitoring Solution

The Gasguard 2 (GG2) monitoring solution comprises an intrinsically safe GG2 Display Module which allows for the display and transmission of sensor data and system information. The Display Module interfaces to a range of GG2 Detectors for monitoring the atmospheric concentration of the target gas. Ampcontrol supplies a range of accessories for installing, operating and configuring the GG2 Detectors.

Technical Data Sheet – Gasguard 2 Non-dispersive Infra-red Detectors CH4 CO2

The Non-dispersive Infrared (NDIR) CH4 and CO2 models of the GG2 Detector are intrinsically safe sensors for monitoring the atmospheric concentration of Methane (CH4) or Carbon Dioxide (CO2) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Catalytic Detector CH4

The Catalytic (CAT) CH4 model of the GG2 Detector is an intrinsically safe sensor for monitoring the atmospheric concentrations of Methane (CH4) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Electrochemical Detectors CO, O2

The Electrochemical (EC) CO and O2 models of the GG2 Detector are intrinsically safe sensors for monitoring the atmospheric concentration of Carbon Monoxide (CO) or Oxygen (O2) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Display

The Gasguard 2 (GG2) Display Module is an intrinsically safe apparatus for the purpose of displaying and transmitting sensor data and system information. The GG2 Display consists of a certified GG2 Display Module and associated wiring installed within an IP66 rated stainless steel enclosure. The GG2 Display is available in three variants: a glanded display supporting iMAC/RS485 communication and two pluggable versions supporting 4-20mA+iMAC and 4-20mA+RS485 communication. The display connects to a variety of compatible detectors via the robust proprietary connector.

User Manual – Gasguard 2 Display

The GG2 Display Module is an intrinsically safe apparatus for the purpose of displaying and transmitting sensor data and system information. The GG2 Display consists of a certified GG2 Display Module and associated wiring installed within an IP66 rated stainless steel enclosure.

The GG2 Display is available in three variants, a glanded display supporting iMAC/RS485 communication and two pluggable versions supporting 4-20mA+iMAC and 4-20mA+RS485 communication. The display connects to a variety of compatible detector modules via the robust proprietary connector. An optional Remote Cable Assembly is available for mounting compatible modules up to 10 metres from the GG2 Display.

Case Study – Ampcontrol Hire Fleet: Powering Sydney’s WestConnex

Utilising its extensive hire fleet, Ampcontrol is helping to ease congestion and connect communities by powering Sydney’s WestConnex, the largest transport infrastructure project in Australia.

Ampcontrol undertook the design, supply and commissioning of a complete electrical system from Ausgrid’s 11kV point of supply, to surface and underground facilities across the new M4 WestConnex tunnelling sites.

Case Study – H3RO Singapore Tunnelling Project

Tunnelling applications require repeatable patterns of emergency call points every 100m, these call points need to be installed as the tunnel borer progresses while maintaining reliable communications. Ampcontrol deployed H3RO, our harsh environment reticulated optic solution which reduces network complexity and offers plug and play functionality with off the shelf components which do not require fibre specialists to install.

Tunnelling Solutions

Ampcontrol designs, manufactures and delivers cost effective and integrated electrical solutions for tunnelling and infrastructure projects that improve safety, efficiency and flexibility.Our proven engineering and manufacturing experience has enabled us to integrate our wide variety of product streams into customised turnkey solutions for tunnelling and infrastructure projects around the globe. We are a single source provider of power distribution, automation and HV service solutions.