User Manual – iMAC2 Controller Modbus TCP-IP Communications

This document is intended to provide a detailed explanation of the communications protocols supported by the iMAC2 Controller’s Ethernet port. The iMAC2 Controller uses industry standard Modbus TCP/IP protocol for exchanging data with compatible Ethernet devices. The iMAC2 Controller facilitates a Modbus Slave (server) device. This document is not intended to provide information on the operation of the overall iMAC System, individual modules or instruction on programming the iMAC2 Controller or modules. Please refer the relevant supplementary documents for this information.

Technical Datasheet – iMAC LIM

The iMAC LIM is an Intrinsically Safe (Ex ia), highly configurable remote indication module, which interfaces directly to the iMAC Fieldbus.

Software – iTools

iTools is a Windows PC based utility which allows programming of iMAC Controllers Firmware and SLP code.

Minimum system requirements : MS Windows 7 / 8.1 / 10 (32 and 64 bit supported). Current version : v3.25

NOTE: The download size is ~90MB

User Manual – iMAC2 Controller Ethernet-IP Communications

This document provides a detailed explanation of the communications protocols supported by the iMAC2 Controller’s Ethernet port. This document is not intended to provide information on the operation of the overall iMAC system, individual modules or instruction of programming the iMAC2 Controller or modules. Please refer to the relevant supplementary documents for this information.