Technical Data Sheet – Gasguard 2 Monitoring Solution

The Gasguard 2 (GG2) monitoring solution comprises an intrinsically safe GG2 Display Module which allows for the display and transmission of sensor data and system information. The Display Module interfaces to a range of GG2 Detectors for monitoring the atmospheric concentration of the target gas. Ampcontrol supplies a range of accessories for installing, operating and configuring the GG2 Detectors.

Technical Data Sheet – Gasguard 2 Non-dispersive Infra-red Detectors CH4 CO2

The Non-dispersive Infrared (NDIR) CH4 and CO2 models of the GG2 Detector are intrinsically safe sensors for monitoring the atmospheric concentration of Methane (CH4) or Carbon Dioxide (CO2) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Catalytic Detector CH4

The Catalytic (CAT) CH4 model of the GG2 Detector is an intrinsically safe sensor for monitoring the atmospheric concentrations of Methane (CH4) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Electrochemical Detectors CO, O2

The Electrochemical (EC) CO and O2 models of the GG2 Detector are intrinsically safe sensors for monitoring the atmospheric concentration of Carbon Monoxide (CO) or Oxygen (O2) gas. The stainless steel housing is robust, corrosion resistant and fit for purpose. Power and communications is facilitated through the low profile connector, allowing for quick plug and play connections to compatible models, such as the GG2 Display.

Technical Data Sheet – Gasguard 2 Display

The Gasguard 2 (GG2) Display Module is an intrinsically safe apparatus for the purpose of displaying and transmitting sensor data and system information. The GG2 Display consists of a certified GG2 Display Module and associated wiring installed within an IP66 rated stainless steel enclosure. The GG2 Display is available in three variants: a glanded display supporting iMAC/RS485 communication and two pluggable versions supporting 4-20mA+iMAC and 4-20mA+RS485 communication. The display connects to a variety of compatible detectors via the robust proprietary connector.

User Manual – Gasguard 2 Display

The GG2 Display Module is an intrinsically safe apparatus for the purpose of displaying and transmitting sensor data and system information. The GG2 Display consists of a certified GG2 Display Module and associated wiring installed within an IP66 rated stainless steel enclosure.

The GG2 Display is available in three variants, a glanded display supporting iMAC/RS485 communication and two pluggable versions supporting 4-20mA+iMAC and 4-20mA+RS485 communication. The display connects to a variety of compatible detector modules via the robust proprietary connector. An optional Remote Cable Assembly is available for mounting compatible modules up to 10 metres from the GG2 Display.

Technical Data Sheet – Gasguard CH4 Sensor (ATEX)

Ampcontrol’s Gasguard Flammable Gas Sensor/Transmitter (ATEX) is supplied complete with an amplifier and a Liquid Crystal Display. The Gas sensor is housed in a cast stainless steel enclosure, has been approved to be intrinsically safe and is suitable for use in a Zone 0 hazardous area. A remote head version with up to ten metres of cable is also available for use on mobile machinery such as roof bolters and continuous miners.

Gasguard HS2 CO O2 NO NO2 Sensors User Manual

User manual for Ampcontrol’s Gasguard Transmitter/Sensor assembly an IEC Ex ia Group I certified assembly. The Certification is based on the unit being sealed to IP66 in a stainless steel enclosure and the appropriate checks being made on the Intrinsically Safe Parameters of the overall system the transmitter is connected into.

Technical Data Sheet – SF6 Leak Detector – Electrochemical

The Austech SF6 Leak Detector is an extractive gas sampling system designed for the continuous detection and monitoring of gas leaks, in particular Sulphur Hexafluoride (SF6). The system houses an in-built gas sensor which is designed to enhance the detection sensitivity of SF6.

Technical Data Sheet – Touchpro Series Modular Controllers

Application – As universal controller as any field instrument can be connected that has 4-20mA output including temperature and humidity sensors. Environmental monitoring and control in food and beverage, pharmaceutical industries. Heating, Ventilation and Air Condition (HVAC) monitoring and control in residential and commercial buildings. HVAC monitoring in recreational facilities and shopping malls.