• Login

Ampcontrol

Russian Chinese (simplified) English
  • Media
  • Contact Us
  • Home
  • About Us
  • Our Products & Services
  • Innovation
  • Careers
Print this page
  • Industries
  • Product Streams
  • A-Z Listing
  • Contacts Directory
Product Search

Products for:

search
search

OR

  • Home
  • Our Products & Services
  • Product Details
  • Motor Protection Relay

Motor Protection Relay

Product image

The MPA Motor Protection Relay has been designed to provide optimum protection of 415V motors used on conveyors, pumps, fans, compressors and lifts.

A two-line backlit LCD display combining with a keypad provides an easy to operate user interface.

Overview

Description

Protection functions are:

  • Earth Leakage: Trip Setting range 100 – 500mA, Time Delay setting range 155mS - 475mS
  • Residual Current: Trip Setting range 10-100%, Time Delay setting range 100mS –5S
  • Overload: Current Range 5.125A – 640A
  • Short Circuit: Trip setting 3 to 10 times
  • Current Balance: Trip Settings: range 5%, 10%, 20%, 50% and off
  • Under Voltage: Trip Setting: range 40% - 95% and off

The motor protection relay has features to monitor temperature, provide alarms before a trip condition and through the 50 event log, diagnose a problem after a fault has occurred.   In addition to the above, a high voltage DC “Insulation Test’ to earth of the equipment connected to the outlet can also be carried out.  If the result falls below the setting for the Insulation Test then an alarm is given and/or the outlet is stopped from being energised.

The relay is supplied from a 240VAC or 110VAC supply.

 

MPA3 V 6.2Motor Protection Relay

The MPA3 V6.2’s event log and adjustable settings have battery back up with an approved IS Battery (AUS Ex 01.2533X Exia I).  Earth leakage protection is approved to AS2081.3.1988 for mining applications. Insulation testing is standard and can be manually initiated at any time.

 

Repairs and Service

Extensive workshop and field resources are available to repair, service and maintain electronic protection equipment for the mining, industrial and general industries.

Experienced, qualified engineers carry out work that comply with the relevant Australian Standards and Approvals for specific customer requirements.

See also IPM - Integrated Protection Relay

Features include:

  • MPA3 V5.2
    • 23 Status messages and 50 Event Log
    • Manual or automatic reset of overload
    • Backlit LCD Display
  • MPA3 V6.2
    • Insulation test facility
    • Standards Approved to Australia

Benefits include:

  • Aids fault finding
  • User friendly interface
  • Allows automatic reset when thermal accumulator falls below set value
  • Safety for personnel
  • For use in mining applications

Downloads

Product Brochures
  • Motor Protection Relays
Ampcontrol Allenwest Wallacetown ATF Mining Electrics Austech Instruments Burn Brite ResTech Ampcontrol Group of Companies
© Ampcontrol Pty Ltd
Legal, Copyright & Disclaimer | Terms & Conditions | Privacy | Sitemap